| Content | Aspartame is a non-carbohydrate artificial sweetener, as an artificial sweetener, aspartame has a sweet taste, almost no calories and carbohydrates.
Aspartame is 200 times as sweet sucrose, can be completely absorbed, without any harm, the body metabolism. aspartame safe, pure taste. currently, aspartame was approved for use in more than 100 countries, it has been widely used in beverage, candy, food, health care products and all types.
Approved by the FDA in 1981 for spreading dry food, soft drinks in 1983 to allow the preparation of aspartame in the world after more than 100 countries and regions are approved for use, 200 times the sweetness of sucrose.
Aspartame has the advantage of: (1) safe, by the United Nations Committee on Food Additives as GRAS level (generally recognized as safe) for all Sweeteners in the most thorough research on human security products, has been more than 100 countries around the world, more than 6,000 products in the 19 years of successful experience (2) Aspartame sweet taste of pure sucrose with very similar fresh and sweet, no bitter after taste and metallic taste, is by far the closest to the successful development of the sweet sugar sweetener. Aspartame 200 times sweeter than sucrose, only a small amount in the application can achieve the desired sweetness, so use in food and beverage sugar substitute aspartame, can significantly reduce the heat and will not cause tooth decay (3) Aspartame or other sweeteners and sugar mixed with a synergistic effect, such as 2% to 3% in the saccharin, the saccharin can significantly mask the bad taste. (4) Aspartameand flavor mixed with the excellent efficiency of, especially for acidic citrus, lemon, grapefruit, etc., can make a lasting flavor, reduce the amount of air freshener. (5) Proteins, aspartame can be absorbed by the bodys natural decomposition. Use：1.Beverage: carbonated and still soft drink, fruit-juice and fruit syrup, yoghurt and etc. 2.Food: hot and cold chocolate and beverage mixes and instant dessert, frozen novelty and dessert, chewing gum, boiled sweet, mint, chocolate, gum and jelly and etc. 3.Pharmaceutical: tablet, sugar-free syrup, powdered mix and effervescent tablet and etc. | ITEMS | STANDARD | | APPEARANCE | WHITE GRANULAR OR POWDER | | ASSAY (ON DRY BASIS) | 98.00%-102.00% | | TASTE | PURE | | SPECIFIC ROTATION | +14.50°~+16.50° | | TRANSMITTANCE | ≥ 95.0% | | ARSENIC( AS) | ≤ 3PPM | | LOSS ON DRYING | ≤ 4.50% | | RESIDUE ON IGNITION | ≤ 0.20% | | L-a-ASPARTY-L-PHENYLALAINE | ≤ 0.25% | | PH | 4.50-6.00 | | L-PHENYLALANINE | ≤ 0.50% | | HEAVY METAL( PB) | ≤ 10PPM | | CONDUCTIVITY | ≤ 30 | | 5-BENZYL-3,6-DIOXO-2-PIPERAZINEACETIC ACID | ≤ 1.5% | | OTHER RELATED SUBSTANCES | ≤ 2.0% | | FLUORID( PPM) | ≤ 10 | | PH VALUE | 3.5-4.5 | | Description：Gellan Gum is a kind of extra cellular polysaccharide excreted by microorganism Pseudomonas elodea.It is a linear structure with a repeating unit of tetrasaccharide.As emulsifier,suspension agent,thickener,stabilizer, gelling agent, tissue culture medium,film former and lubricant,gellan gum has been widely used in over 20 fileds, such as food, cosmetics, detergent, ceramics, petroleum exploration and coating for chemical industry, it is considered as one of the most advanced food additive in the world. Applications of Gellan Gum: Pharmaceutical Industry: Eyedrops;Soft or hard capcule;Coating. Cosmetics: Personal tending products;Perfume. Chemical industry:Coating;Gelling agents;Toothpaste. Agriculture:Fertilizer gels. Others:Car Air Fresheners;Microorganism;Plant Culture Medium, etc
| ITEMS | STANDARDs | | Appearance | Off-white powder | | Purity(CO2 yielding) | 3.3%-6.8% | | Loss on drying(105℃,2.5hours | 15% Max | | Transmittance | 80% Min | | Gel Strength | 900g/cm2 Min | | Ash | 12% Max | | Isopropyl alcohol | 750 mg/kg Max | | PH | 6.0-8.0 | | Lead(Pb) | 2mg/kg Max | | Arsenic (As) | 3mg/kg Max | | Mercury(Hg) | 1mg/kg Max | | Cadmium(Cd) | 1mg/kg Max | | Heavy metals | 20mg/kg Max | | Total plate count | 10000cfu/g Max | | Mould & Yeast | 400cfu/g Max | | Salmonella Spp./10g | Negative | | E.coli/5g | Negative | | Particle Size | Min 95% Pass 80mesh |
| Properties White microdot powder with luster, melting point at 622℃, easily soluble in water, with remarkable chelating ability to some metal ions such as Ca2+, Mg2+, can soften hard water, change suspension into solution, alkalescent, without causticity. Uses
Used as main auxiliary of synthetic wash, soap synergistic agent, water softener, leather pre-tanning agent, dye auxiliary agent, and dispersant of suspension such as paint, kaolin, magnesium oxide, calcium carbonate drilling mud, preservative agent for paper making, organic synthesis catalyzer, and used in epuration of petroleum product, gum latex storage, as dispersant, solvent in metal industry and pharmaceutical industry, also widely used in gum synthesis, foodstuff industry, and poultry process.
| ITEMS | STANDARDs | | Assay (%) (Na5P3O10) | 94%MIN | | Appearance | WHITE GRANULAR | | P2O5 (%) | 57.0 MIN | | Bulk density | 0.4~0.6 | | Iron | 0.15%MAX | | Temperature rise | 8~10 | | Polyphosphate | 0.5 MAX | | PH value(%) | 9.2 - 10.0 | | Ignition loss | 1.0% MAX | | 20mesh through | >90% | | Sodium Diacetate is a molecular compound of acetic acid and sodium acetate. According to a patent, free acetic acid is built into the crystal lattice of neutral sodium acetate. The acid is firmly held as is evident from the negligible odor of the product. In solution it is split off into its constituents acetic acid and sodium acetate. As a buffering agent, sodium diacetate is applied in meat products to control their acidity. Apart from that, sodium diacetate inhibits the growth of various microorganisms usually found in meat products, thus it can be used as a preservative and safeguard for food safety and shelf life extension. Moreover, sodium diacetate can be used as a flavoring agent, applied as a powdered seasoning, to impart a vinegar taste to meat products.
| Item | Specification | | Appearance | White, hygroscopic crystalline solid with an acetic odour | | Free Acetic Acid (%) | 39.0- 41.0 | | Sodium Acetate (%) | 58.0- 60.0 | | Moisture (Karl Fischer method, %) | 2.0 Max | | pH (10% Solution) | 4.5- 5.0 | | Formic acid, formates andother oxidizable (as formic acid) | =< 1000 mg/ kg | | Particle Size | Min 80% Pass 60 mesh | | Arsenic (As) | =< 3 mg/ kg | | Lead (Pb) | =< 5 mg/ kg | | Mercury (Hg) | =< 1 mg/ kg | | Heavy Metal (as Pb) | 0.001% Max |
| Citric acid is a weakorganic acid. It is a natural preservative conservative and is also used to add an acidic, or sour, taste to foods and soft drinks. In biochemistry, the conjugate base of citric acid, citrate, is important as an intermediate in the citric acid cycle, and therefore occurs in the metabolism of virtually all living things.
It is Colorless or white crystalline powder and mainly used as an acidulant, flavorant and preservative preservative in foods and beverages. It is also used as an antioxidant, plasticizer and detergent, builder.
Mainly used in the food , beverage trade as the sour flavour agent, flavoring agent, antiseptic as well as antistaling agent
1. In the food industry, Citric Acid Monohydrate uses as the drinks sour flavour agent. Mainly used in various kinds of cold drinks and for such foods production as soda, candy, biscuit, can, jam, fruit juice ,etc., also can be used as greases antioxidant;
2. In medical industry,Citric acid monohydrate is the raw materials of a lot of pharmaceuticals, such as the citric acid piperazine(lumbricide ), ferric ammonium citrate (blood tonic ), sodium citrate (blood transfusion pharmaceutical). In addition, citric acid also is used as the acidifier in many pharmaceuticals;
3. In the chemical industry, the ester of citric acid can use as the Acidity regulators to make the plastic film of food packing ;
4. In other respects, such as used in industry and civil detergent as the auxiliary agent for making nuisance free detergent; Used in the concrete as the retarder; also been widely used in electroplating, leather industry, printing ink, blue print industry,etc.
| ITEMS | STANDARD | | Appearance | Colorless crystals or white crystalline powders | | Assay | 99.5%-100.5% | | Moisture | 7.5-8.8 | | Sulphated Ash | ≤ 0.05% | | Light Transmittance | ≥97.0% | | Sulpahte | ≤150ppm | | Chloride | ≤50ppm | | Calcium | ≤75ppm | | Heavy Metal | ≤5ppm | | Iron | ≤5ppm | | Oxalate | ≤100ppm | | Readily Carbonizable | Not darker than STANDARD | | Aluminium | ≤0.2ppm | | Arsenic | ≤1ppm | | Mercury | ≤1ppm | | Lead | ≤0.5ppm | | Endotoxin of Germ | ≤0.5IU/Mg | | Tridodecylamine | ≤0.1ppm | | Gum Arabic, also known as Acacia Gum, chaar gund, char goond, or meska, is a natural gum made of hardened sap taken from two species of the acacia tree; Acacia senegal and Acacia seyal. The gum is harvested commercially from wild trees throughout the Sahel from Senegal and Sudan to Somalia, although it has been historically cultivated in Arabia and West Asia.
Gum Arabic is a complex mixture of glycoProteins and polysaccharides. It was historically the source of the sugars arabinose and ribose, both of which were first discovered and isolated from it, and are named for it.
Gum arabic is used primarily in the food industry as a stabilizer. It is edible and has E number E414. Gum arabic is a key ingredient in traditional lithography and is used in printing, paint production, glue, cosmetics and various industrial applications, including viscosity control in inks and in textile industries, although less expensive materials compete with it for many of these roles.
While gum arabic is now produced mostly throughout the African Sahel, it is still harvested and used in the Middle East. For example, Arab populations use the natural gum to make a chilled, sweetened, and flavored gelato-like dessert.
| ITEMS | STANDARD | | Appearance | Off-white to Yellowish Granular or Powder | | Odor | Own inherent smell, no odor | | Viscosity ( Brookfield RVT, 25%, 25℃, Spindle #2, 20rpm, mPa.s) | 60- 100 | | pH | 3.5- 6.5 | | Moisture(105℃, 5h) | 15% Max | | Solubility | Soluble in water, insoluble in ethanol | | Nitrogen | 0.24%- 0.41% | | Ash | 4% Max | | Insolubles in Acid | 0.5% Max | | Starch | Negative | | Dannin | Negative | | Arsenic (As) | 3ppm Max | | Lead (Pb) | 10ppm Max | | Heavy Metals | 40ppm Max | | E.Coli/ 5g | Negative | | Salmonella/ 10g | Negative | | Total Plate Count | 1000 cfu/ g Max |
Specifications of Acacia Gum Powder :
| ITEMS | STANDARD | | Appearance | White to off-white Powder | | Odor | Own inherent smell, no odor | | Viscosity (25%, 25℃, mPa.s) | 60- 100 | | pH | 3.5- 6.5 | | Moisture(105℃, 4h) | =< 10% | | Total ash | =< 4% | | Acid insoluble ash | =< 0.5% | | Acid insoluble matter | =< 1% | | Nitrogen | 0.24%- 0.41% | | Starch or dextrin | Negative | | Tannin | Negative | | Arsenic (As) | =< 2 mg/kg | | Lead (Pb) | =< 3 mg/kg | | Mercury (Hg) | =< 1 mg/kg | | Cadmium (Cd) | =< 1 mg/kg | | Heavy Metals | =< 20 mg/kg | | E.coli/ 5g | Negative | | Salmonella spp./ 10g | Negative | | Total Plate Count | =< 5000 cfu/ g |
Specifications of Acacia Gum Spray-dried Powder :
| ITEMS | STANDARD | | Appearance | White to off-white Powder | | Odor | Own inherent smell, no odor | | Viscosity ( Brookfield RVT, 25%, 25℃, Spindle #2, 20rpm, mPa.s) | 60- 100 | | pH | 3.5- 6.5 | | Moisture(105℃, 4h) | =< 10% | | Total ash | =< 4% | | Acid insoluble ash | =< 0.5% | | Acid insoluble matter | =< 1% | | Nitrogen | 0.24%- 0.41% | | Starch or dextrin | Negative | | Tannin | Negative | | Arsenic (As) | =< 2 mg/kg | | Lead (Pb) | =< 3 mg/kg | | Heavy Metals | =< 20 mg/kg | | E.coli/ 5g | Negative | | Salmonella spp./ 10g | Negative | | Total Plate Count | =< 5000 cfu/ g |
|
Reviews
There are no reviews yet.